The replacement PSU for the 1290B Evercase will be slightly different from the original. It will be smaller and have different fan placement. It will

First remove the 12 screws that hold on the D panel. Here are the two different screws that are on the D panel: After the

1.  Remove the eight screw covers and the screws that are underneath them. 2. Disconnect the touchscreen cable. 3.  Remove the six small screws holding

First, remove the screws holding down the larger panel on the back. After carefully removing the panel, remove the screw labeled “K/B”. To remove the

The first step is to remove all of the screws from the bottom panel, including under the HDD and DVD drive: You will also need

How to Use ByteSpeed’s Ticket System (Vector) Vector is our ticket management system.  If you have access to it, then you can use it to

Before we begin, if you have any questions or concerns, please reply here, send an email to helpdesk@bytespeed.com or call us at 877-553-0777 First remove the 6

Before we begin, if you have any questions or concerns, please reply here, send an email to helpdesk@bytespeed.com or call us at 877-553-0777 To begin, first remove

To remove the keyboard from an E13, remove the battery and slide the clips shown, sometimes it’s easiest to open the laptop and turn in

Start by removing the eight screws shown in the image below. After getting the bottom panel pulled off, remove the two screws shown below and