by Brenda Clifton | Jun 15, 2021 | Support Docs - Desktop
MS-AA16 AIO ODD Installation Remove the nine screws circled in red. Then remove the two caps circled in blue. There are two screws under each cap: remove all four screws and then remove the stand. Once you’ve removed all of that, you can carefully remove the back... by Brenda Clifton | Jun 15, 2021 | Support Docs - Desktop
Removing HDD from Z583 1) Remove the side panel with the air vent by taking out the 2 screws, releasing the clips, and pulling the panel back. 2) Remove the two screws holding the hard drive in, the hard drive will slide out top first 3) Remove the red data cable and... by Brenda Clifton | Jun 15, 2021 | Support Docs - Desktop
Replacing the 1290B PSU The replacement PSU for the 1290B Evercase will be slightly different from the original. It will be smaller and have different fan placement. It will also come with a bracket that will need to be attached to the end of it so it will be able to... by Brenda Clifton | Jun 15, 2021 | Support Docs - Laptop
X501 HDD, RAM, Battery Access, and Keyboard Removal First remove the 12 screws that hold on the D panel. Here are the two different screws that are on the D panel: After the screws are out the panel should just lift off. This should give you access to the HDD, RAM,... by Brenda Clifton | Jun 15, 2021 | Support Docs - Laptop
Reseating NL3 LCD Cable/Removal of Screen 1. Remove the eight screw covers and the screws that are underneath them. 2. Disconnect the touchscreen cable. 3. Remove the six small screws holding the LCD and the webcam in then remove the four large screws holding the...