Reseating NL3 LCD Cable/Removal of Screen

Reseating NL3 LCD Cable/Removal of Screen 1.  Remove the eight screw covers and the screws that are underneath them. 2. Disconnect the touchscreen cable. 3.  Remove the six small screws holding the LCD and the webcam in then remove the four large screws holding the...

MB40 Keyboard Removal

MB40 Keyboard Removal First, remove the screws holding down the larger panel on the back. After carefully removing the panel, remove the screw labeled “K/B”. To remove the keyboard, carefully push these eight pins away from the keyboard using a small flat-head...

MB40 C-Panel Removal

MB40 C-Panel Removal The first step is to remove all of the screws from the bottom panel, including under the HDD and DVD drive: You will also need to remove the bottom cover over the CPU and RAM, and there are additional screws to remove: Next remove the heatsink and...

M100 Keyboard Removal

M100 Keyboard Removal How to Use ByteSpeed’s Ticket System (Vector) Vector is our ticket management system.  If you have access to it, then you can use it to check on your companies’ tickets. The first step is to setup Vector. When you login you will see the...

NL6 Keyboard Removal

NL6 Keyboard Removal Before we begin, if you have any questions or concerns, please reply here, send an email to helpdesk@bytespeed.com or call us at 877-553-0777 First remove the 6 rubber screw covers, then the screws that are on the B panel (LCD Trim). After the...