MB40 C-Panel Removal

MB40 C-Panel Removal The first step is to remove all of the screws from the bottom panel, including under the HDD and DVD drive: You will also need to remove the bottom cover over the CPU and RAM, and there are additional screws to remove: Next remove the heatsink and...

M100 Keyboard Removal

M100 Keyboard Removal How to Use ByteSpeed’s Ticket System (Vector) Vector is our ticket management system.  If you have access to it, then you can use it to check on your companies’ tickets. The first step is to setup Vector. When you login you will see the...

NL6 Keyboard Removal

NL6 Keyboard Removal Before we begin, if you have any questions or concerns, please reply here, send an email to helpdesk@bytespeed.com or call us at 877-553-0777 First remove the 6 rubber screw covers, then the screws that are on the B panel (LCD Trim). After the...

NL6 Chromebook Motherboard Removal

NL6 Chromebook Motherboard Removal Before we begin, if you have any questions or concerns, please reply here, send an email to helpdesk@bytespeed.com or call us at 877-553-0777 To begin, first remove the 10 rubber screw covers on the D panel, their locations are...

E13 Keyboard Removal

E13 Keyboard Removal To remove the keyboard from an E13, remove the battery and slide the clips shown, sometimes it’s easiest to open the laptop and turn in upside down: The keyboard should now be loose, you may have to pull it out slightly, this is where having it...

U10 Hard Drive Removal

U10 Hard Drive Removal Start by removing the eight screws shown in the image below. After getting the bottom panel pulled off, remove the two screws shown below and slide the hard drive out to the left to remove it. If you require additional assistance, please feel...